Comparison of percutaneous and open repair of Achilles tendon rupture: results and complications from a single institution.

BACKGROUND: The Achilles tendon is the strongest tendon in the human body, but it is prone to injury, especially in modern times when recreational sports are growing in popularity. As a result, Achilles tendon rupture is becoming an increasingly common medical problem in modern society. The main objective of this study was to compare the outcomes of percutaneous repair and open repair for the treatment of Achilles tendon rupture. METHODS: A retrospective study was conducted involving a total of 316 patients who had undergone surgical treatment for Achilles tendon rupture between 2013 and 2021. The data collected from the medical history of these patients included the type of surgical procedure, the mechanism of injury, the age and sex of the patients, the time spent in the hospital, and any possible complications of the surgical treatment (such as infections, reruptures, or sural nerve injuries). RESULTS: The study revealed that there was no significant difference between percutaneous and open surgical approaches in terms of sural nerve injury. However, there was a statistically significant advantage of the percutaneous method in terms of the number of infections, which was significantly lower than that of the open method. Additionally, the median length of hospital stay was found to be four days longer with the open approach. However, the study noted that a statistically significant advantage of the percutaneous method for rerupture could not be established due to the small number of patients with rerupture and the insufficient ratio of patients with rerupture in relation to the size of the observed population. CONCLUSIONS: Percutaneous repair is an effective treatment option for Achilles tendon rupture and has outcomes equal to or better than those of open repair. Therefore, this approach is recommended as the preferred method of treatment due to the presence of fewer complications, provided that the indications for this technique are appropriate.

Biomechanical analysis of a novel screw system with a variable locking angle in mandible angle fractures.

Locking plates nowadays represent an important treatment in bone trauma and bone healing due to its strong biomechanical properties. The purpose of this study was to both computationally and experimentally validate a novel screw locking system by comparing it to another locking system from state-of-the-art and to apply it in an environment of a fractured mandible. FEA was used to test both systems prior to experimental tests. The systems were locked in the plate holes at 0°, 10°, 15°, and 20°. Cyclic bending tests and push-out tests were performed in order to determine the stiffness and push-out forces of both locking systems. Finally, newly designed locking system was implemented in mandibular angle fracture. Control locking system was biomechanically superior in push-out test, but with no greater significance. In contrast, the new locking system showed greater stiffness by 17.3% at the deflection angle of 20° in cyclic tests, with lower values for other deflection angles. Similar values were displayed in fractured mandible angle environment. Greater stiffness of the new locking system in cyclic loading tests, together with polyaxiallity of the new locking screw, could lead to easier application and improved biomechanical stability of the mandible angle fractures.

Biomechanical analysis of a novel Y-plate designed for the treatment of extraarticular distal humerus fractures.

Adult distal humerus fractures are infrequent, yet they account for one-third of all humerus fractures. For the treatment of comminuted and osteoporotic fractures, locking plates are claimed to be biomechanically superior to alternative internal fixing techniques. Treatment remains difficult despite recent advancements and the use of locking plates due to frequent comminution, low bone quality, and limited healing ability in osteoporotic bone. An optimal design of the newly constructed plate and the control model were selected. The biomechanical characteristics of non-osteoporotic and osteoporotic synthetic bone were compared on six models. The biomechanical properties of the new plate were tested and compared on 54 osteoporotic synthetic humerus models. The control models were reconstructive and parallel LCPs. The tests were carried out under static and dynamic axial, lateral and bending loads. Fracture displacements were measured by optical measuring system Aramis. The test model is significantly stiffer for lateral load (p = 0.0007) and for bending load at the moment of model failure (p = 0.0002), while for axial load the LCP model showed greater stiffness (p = 0.0017). During lateral dynamic loading, all three LCP models broke and there was a significant difference compared to the test model (p = 0.0125). The LCP model is dynamically significantly more durable under axial load, while the largest displacements were recorded with the test model (p = 0.029). The displacements induced by all three loads are within the limits that fulfil the parameters of appropriate biomechanical stability. A novel locking plate for extra-articular distal humerus fractures may provide an alternative to the traditional two-plate.

Novel screw fixation placement configuration for the treatment of Pauwels type III femoral neck fractures: a finite element analysis.

Verticality of transcervical hip fractures in young patients is usually connected with typically high-energy fractures which are known as Pauwels type III. Artificial femoral head replacement surgery is mostly not considered for treating femoral neck fractures in such patients. The commonly used devices for the fixation of vertical femoral neck fractures are multiple screws or a sliding hip screw with or without an antirotation screw. Size, location and length of the screws are the most effective parameters in terms of the structural performance of internal fixation implants, but the optimal configuration of the screws is necessary to be investigated to direct the clinical practice. The aim of this study is to compare the biomechanical stability of the standard inverted triangle configuration with the various newly proposed x-crossed screw configurations. FEA simulations carried out in this study demonstrated that using an x-crossed-right assembly in treating Pauwels type III femoral neck fractures satisfies the biomechanical stability in terms of maximum von Mises stresses and maximum femoral head displacement. However, in terms of maximum relative neck fracture displacement, the x-crossed-right assembly would not entirely suffice the desired biomechanical stability. Therefore, using an x-crossed screw assembly in treating femoral neck fractures would provide the needed biomechanical stability.

Medicinal signaling cells niche in stromal vascular fraction from lipoaspirate and microfragmented counterpart.

AIM: To expand our previous findings by increasing the number of patients in a study characterizing medicinal signaling cells (MSC) of stromal vascular fraction from lipoaspirate (SVF-LA) and from microfragmented lipoaspirate (SVF-MLA) applied for the treatment of osteoarthritis (OA). METHODS: Twenty OA patients, including 8 new patients, acquiring autologous microfragmented adipose tissue were enrolled. In-parallel immunophenotyping of SVF-LA and SVF-MLA was performed. The samples were incubated in a DuraClone SC prototype tube targeting the CD31, CD34, CD45, CD73, CD90, CD105, and CD146 surface markers, stained with the DRAQ7 cell nuclear dye and Live/Dead Yellow Fixable Stain, and analyzed by flow cytometry. RESULTS: The population phenotypes in SVF-LA and SVF-MLA samples included CD31+CD34+CD73±CD90±CD105±CD146± endothelial progenitors (EP), CD31+CD34-CD73±CD90±CD105-CD146± mature endothelial cells, CD31-CD34-CD73±CD90+CD105-CD146+ pericytes, CD31-CD34+CD73±CD90+CD105-CD146+ transitional pericytes, and CD31-CD34+CD73highCD90+CD105-CD146- supra-adventitial-adipose stromal cells. Compared with the autologous SVF-LA samples, the prevailing cell type in SVF-MLA were EP, which outnumbered leukocytes and supra-adventitial-adipose stromal cells (SA-ASC). The ratio of progenitor cells in SVF-MLA samples differed between female and male patients, showing a higher EP-pericyte and pericyte-SA-ASC ratio in men. CONCLUSION: Our results, hallmarked by EP-enriched anti-inflammatory features and indicating a possible sex-specific impact, contribute to defining the cellular composition of the clinically applied MSC serving as a regenerative cell therapy in OA.

IMPACT OF CEMENTLESS ZWEYMÜLLER STEM ANTEVERSION ON RESISTANCE TO PERIPROSTHETIC FRACTURE IN TOTAL HIP ARTHROPLASTY.

Total hip arthroplasty implies proper orientation of both acetabular and femoral components with a range of 25-40° of combined anteversion. The aim of the study was to examine resistance to periprosthetic fracture of the axially loaded cross section rectangular femoral stem (Zweymüller) with respect to different degrees of anteversion, implanted in the artificial bone model, in laboratory conditions. Femoral bone models with implanted femoral stems were divided into 3 groups depending on the degree of stem anteversion (A, control group 13-17°; B, stem retroverted 0°-4°; and C, stem anteverted 26-30°). The amount of axial load leading to periprosthetic fracture (PPFx) of the artificial bone model was determined experimentally for each construct. The results showed that the load at which the PPFx occurred significantly increased with the increase of the endoprosthesis anteversion angle. In our clinical practice, we are often unable to place the acetabular component in an ideal grade of anteversion for intraoperatively determined reasons. The results of this experimental study suggested that increasing rectangular femoral (Zweymüller) stem anteversion lowered the risk of PPFx. This study was limited by experimental design (laboratory conditions, artificial bone) and should be clinically verified.

Comparison between external locking plate fixation and conventional external fixation for extraarticular proximal tibial fractures: a finite element analysis.

BACKGROUND: Good clinical outcomes for locking plates as an external fixator to treat tibial fractures have been reported. However, external locking plate fixation is still generally rarely performed. This study aimed to compare the stability of an external locking plate fixator with that of a conventional external fixator for extraarticular proximal tibial fractures using finite element analysis. METHODS: Three models were constructed: (1) external locking plate fixation of proximal tibial fracture with lateral proximal tibial locking plate and 5-mm screws (ELP), (2) conventional external fixation of proximal tibial fracture with an 11-mm rod and 5-mm Schanz screws (EF-11), and (3) conventional external fixation of a proximal tibial fracture with a 7-mm rod and 5-mm Schanz screws (EF-7). The stress distribution, displacement at the fracture gap, and stiffness of the three finite element models at 30-, 40-, 50-, and 60-mm plate-rod offsets from the lateral surface of the lateral condyle of the tibia were determined. RESULTS: The conventional external fixator showed higher stiffness than the external locking plate fixator. In all models, the stiffness decreased as the distance of the plate-rod from the bone surface increased. The maximum stiffness was 121.06 N/mm in the EF-11 model with 30-mm tibia-rod offset. In the EF-7 model group, the maximum stiffness was 40.00 N/mm in the model with 30-mm tibia-rod offset. In the ELP model group, the maximum stiffness was 35.79 N/mm in the model with 30-mm tibia-plate offset. CONCLUSIONS: Finite element analysis indicated that external locking plate fixation is more flexible than conventional external fixation and can influence secondary bone healing. External locking plate fixation requires the placement of the plate as close as possible to the skin, which allows for a low-profile design because the increased distance from the plate to the bone can be too flexible for bone healing. Further experimental mechanical model tests are necessary to validate these finite element models, and further biological analysis is necessary to evaluate the effect of external locking plate fixation on fracture healing.

Polychromatic Flow Cytometric Analysis of Stromal Vascular Fraction from Lipoaspirate and Microfragmented Counterparts Reveals Sex-Related Immunophenotype Differences.

Mesenchymal stem/stromal cells or medicinal signaling cells (MSC)-based therapy holds promise as a beneficial strategy for treating knee OA (osteoarthritis), but there is no standardized protocols nor mechanistic understanding. In order to gain a better insight into the human MSC from adipose tissue applied for autologous OA treatment, we performed extensive comparative immunophenotyping of the stromal vascular fraction from lipoaspirate or microfragmented lipoaspirates by polychromatic flow cytometry and investigated the cellular components considered responsible for cartilage regeneration. We found an enrichment of the regenerative cellular niche of the clinically applied microfragmented stromal vascular fraction. Sex-related differences were observed in the MSC marker expression and the ratio of the progenitor cells from fresh lipoaspirate, which, in female patients, contained a higher expression of CD90 on the three progenitor cell types including pericytes, a higher expression of CD105 and CD146 on CD31highCD34high endothelial progenitors as well as of CD73 on supra-adventitialadipose stromal cells. Some of these MSC-expression differences were present after microfragmentation and indicated a differential phenotype pattern of the applied MSC mixture in female and male patients. Our results provide a better insight into the heterogeneity of the adipose MSC subpopulations serving as OA therapeutics, with an emphasis on interesting differences between women and men.

Cytokines and Chemokines Involved in Osteoarthritis Pathogenesis.

Osteoarthritis is a common cause of disability worldwide. Although commonly referred to as a disease of the joint cartilage, osteoarthritis affects all joint tissues equally. The pathogenesis of this degenerative process is not completely understood; however, a low-grade inflammation leading to an imbalance between anabolic and katabolic processes is a well-established factor. The complex network of cytokines regulating these processes and cell communication has a central role in the development and progression of osteoarthritis. Concentrations of both proinflammatory and anti-inflammatory cytokines were found to be altered depending on the osteoarthritis stage and activity. In this review, we analyzed individual cytokines involved in the immune processes with an emphasis on their function in osteoarthritis.

Surgical treatment of scapular fractures: Results and complications.

INTRODUCTION: The aim of this study was to describe a surgical technique and report on patient-based functional outcomes and complications following open reduction and internal fixation in patients with scapular fractures. METHODS: The study comprised 14 patients who were treated with open reduction and internal fixation (ORIF) of a scapular fractures between September 2010 and July 2018. Surgical indications were as follows: medial/lateral displacement greater than 20 mm; shortening greater than 25 mm; angular deformity greater than 40°; intra-articular step-off greater than 4 mm; and double shoulder suspensory injuries (including fracture of the clavicle, coracoid or acromion with displacement greater than 10 mm). All patients underwent X-ray examination (true AP, Y scapular view) and computed tomography (CT) scans. Fractures were classified according to the revised (AO/OTA) classification system. Functional outcomes were measured using Constant-Murley scores. RESULTS: Seven patients had glenoid fossa fractures, six patients had scapular body fractures and one patient had an acromion process fracture. All glenoid fossa and scapular body fractures were exposed via the Judet approach. Eleven of 14 patients were given Constant-Murley scores at the final follow-up examination; three patients were lost to follow-up. The mean follow-up after injury was 44 months (range, 6-92 months). We found infraspinatus muscle hypotrophy in four patients. The mean Constant-Murley score was 93.45 (±8.93) for the injured arm and 98.36 (±2.91) for the uninjured arm. The mean score between the injured and uninjured arm was 4.91(±6.49), which is an excellent functional outcome according to the Constant-Murley score. CONCLUSIONS: Open reduction and internal fixation of displaced scapular fractures is a safe and effective treatment option that results in a reliable union rate and good-to-excellent functional outcome.

Intramedullary nailing of adult forearm fractures: Results and complications.

INTRODUCTION: The aim of this study was to evaluate the clinical and radiological results of adult forearm fractures treated with interlocking intramedullary nailing. METHODS: This retrospective study included 21 patients who were treated with intramedullary interlocking nailing for forearm fractures between January 2010 and September 2017. All patients were treated with intramedullary forearm nails designed to allow interfragmentary compression. The medical records and radiographs of all patients were evaluated. Fractures were classified according to the AO/OTA classification system by analyzing the radiographs. Union time, union rate, clinical outcome, and complications were evaluated. RESULTS: Primary intramedullary osteosynthesis was performed in 17 patients with forearm shaft fractures. The average union time was 10 weeks (range, 8-16 weeks) in the primary osteosynthesis cohort. Secondary intramedullary osteosynthesis was performed in four patients following the removal of plates and screws due to nonunions. For this group of patients, bone union took an average of 17 weeks (range 8-24 weeks). The overall union rate was 95.24% in the 21 forearm fractures which were treated with an intramedullary interlocking nail with a compression screw that allows interfragmentary compression to be obtained. Overall complications included one nonunion, one postoperative rupture of the extensor pollicis longus tendon, and 1 postoperative transitory radial nerve palsy. CONCLUSIONS: Intramedullary interlocking nailing with a compression screw is an alternative method of fixation for treating adult forearm fractures and provides good clinical outcomes with reliable union rates.

THE CROATIAN HEALTH INSURANCE FUND DOES NOT RECOGNIZE DIFFERENCES IN THE COST OF DIFFERENT TREATMENTS FOR REVISION TOTAL HIP ARTHROPLASTY.

In recent years, there has been increased interest in the cost of treatment for revision interventions for hip and knee prostheses. In all publications so far, the authors note the high cost of treatment for revision interventions, especially if infection is present. The aim of this study was to compare the cost of treatment and health insurance reimbursements between revision total hip arthroplasty (THA) for infection and revision for aseptic indications (aseptic instability and periprosthetic fracture). Hospital data on 168 patients having undergone revision THA between 2010 and 2018 at the Department of Traumatology, Sestre milosrdnice University Hospital Centre from Zagreb were analyzed. Financial data were collected from the Hospital Information System. Financial analysis included total cost per patient, Croatian Health Insurance Fund reimbursements, cost of implants, and length of hospital stay. The difference between the mean total cost per patient and the mean Croatian Health Insurance Fund reimbursements was -262.83 € (-6.08%) for aseptic instability, -1694.94 € (-17.25%) for infection and -916.49 € (-17.33%) for periprosthetic fracture. The Croatian Health Insurance Fund does not recognize differences in the cost of revision THA for aseptic instability, infection and periprosthetic fracture. Health insurance reimbursement is inadequate for centers that offer revision hip surgery.

TREATMENT OF HUMERAL SHAFT FRACTURES: ANTEGRADE INTERLOCKING INTRAMEDULLARY NAILING WITH ADDITIONAL INTERLOCKING NEUTRALIZATION SCREWS THROUGH FRACTURE SITE.

The aim of this study was to compare union time between two different nail designs for the treatment of humeral shaft fracture, i.e. antegrade interlocking intramedullary nail with and without additional interlocking neutralization screws. The retrospective study included 51 patients treated with antegrade humeral intramedullary nailing between January 2015 and December 2017. The inclusion criteria of the study were proximal and middle third humeral shaft fractures. Fifty-one patients met the inclusion criteria; 23 patients were treated with antegrade intramedullary nail with additional interlocking neutralization screws through fracture site (group A) and 28 patients were treated with antegrade intramedullary nail without additional interlocking neutralization screws (group B). Medical documentation and radiographic images taken preoperatively and postoperatively were reviewed. Radiological union was defined as cortical bridging of at least three of four cortices in two-plane radiographs, with disappearance of the fracture gap. There were no significant differences in union time between the groups (p>0.05). To our knowledge, this is the first report of antegrade interlocking humeral nailing with additional interlocking neutralization screws through fracture site. Hypothetical advantages of fracture gap reduction by additional interlocking neutralization screws to promote union were not confirmed by this first clinical trial.

Influence of Gap Shape on Biomechanical Properties of Extra-Articular Distal Humeral Fracture - A Finite Element Study

The aim of the study was to assess the influence of gap shape on biomechanical results in extra-articular distal humeral fracture: with contact on the posterior part (by anterior gap) and contact on ulnar column (by radial gap). The goal was to examine if and to what extent did displacements decrease in comparison with previously examined parallel gap without bony contact. The finite element analysis on the three different plate constructs was performed, i.e. parallel, perpendicular and newly designed Y shape plate were considered. Displacements were measured on articular surface and gap point. The most visible decrease of maximum displacements in the distal part of the model was detected in the Y plate model with axial loading: in case of anterior gap 58.5% and especially at radially formed gap 60.9%. Similarly, at axial loading, displacement at the analyzed point on fracture gap most significantly decreased in Y plate model (by 49.4%) at posterior bony contact. Moreover, the latter showed displacement decrease by 68.5% at ulnar bone contact. Furthermore, if a longer radial plate than the ulnar one was used, varus stress could have been avoided. Study results suggested that sufficient stability could be ensured with the newly designed Y shape plate.

Novel external fixation fracture method with circular locking mechanism compared with the application of dynamic axial external fixator on experimental tibial model ensures better stability in bending and favourable performance in dynamic loads.

OBJECTIVE: The aim of this study was to compare the biomechanical properties of a novel tibial external bone fracture fixator with a circular locking mechanism with standard dynamic axial external fixator. MATERIAL AND METHODS: In order to investigate the prototype usability in experimental conditions, a biomechanical study was performed in which 42 polyacetal tubes set in 14 experimental groups and subgroups represented the fractured tibia that were fixed by a standard dynamic axial external fixator and a novel fixator. Displacements under static and dynamic loads were measured, with static ones corresponding to three directions of fragment movement and dynamic simulating the human gait. Analysis was performed in SPSS v13, with significance set at P<0.05. RESULTS: The novel fixator showed biomechanical superiority in "fragments apart" study groups, while the standard dynamic axial external fixator outperformed the novel one in the situations of bending with "fragments in contact" study groups. There were no significant differences in dynamic load, despite better numerical result of the novel fixator. CONCLUSION: The novel fixator is expectedly faster applicable and offers greater extent of external fixation flexibility. Further developments of this model thus seems justified in both construction improvement and on clinical application.

Comparative study of three models of extra-articular distal humerus fracture osteosynthesis using the finite element method on an osteoporotic computational model.

INTRODUCTION: The biomechanical properties of extra-articular fractures of the distal humerus have not been researched sufficiently. The aim of the study was to examine three different models of osteosynthesis for extra-articular distal humerus fractures. Osteosynthesis with two parallel or perpendicular plates is a common method of osteosynthesis for those fractures. We wanted to examine the biomechanical performance of a newly designed Y plate, and compare it to the previously used osteosynthesis methods. MATERIALS AND METHODS: On an osteoporotic computational model of the distal humerus, a 10 mm gap was made, 25 mm above the olecranon fossa, and osteosynthesis was performed with the newly designed Y-shaped plate and with 3.5 reconstruction plates in parallel and perpendicular configuration. The numerical simulations in axial compression, bending and varus loading were conducted using the finite element method. RESULTS: On all models the largest displacements in the area of the fracture gap appear around the lower anterior edge. The parallel plate construct had the highest stiffness among the three plating techniques in axial compression. In bending and varus loading the construct with the newly designed plate had the highest stiffness, but in axial compression demonstrated the lowest. The parallel plate configurations had higher stiffness than the perpendicular ones in all three loading directions and the difference is most pronounced in axial compression. CONCLUSION: The displacements that appeared in all three plating systems are minimal and within the limits that meet the requirements of sufficient biomechanical stability in the usual time for the healing of fractures in that region. The newly designed Y-shaped plate for extra-articular fractures of the distal humerus is a possible alternative to the usual method of osteosynthesis with two plates in the case of an extra-articular fracture of the distal humerus. Further biomechanical studies are needed for a decisive conclusion.

Precise nail tip positioning after tibial intramedullary nailing prevents anterior knee pain.

PURPOSE: Anterior knee pain (AKP) is a common complication following intramedullary nailing of tibial shaft fractures. Our aim was, by analysing the postoperative lateral knee X-rays and clinical status (VAS score), to find the best intramedullary tip position of a non protruded nail that will provide the best postoperative outcome avoiding AKP. METHODS: We evaluated the postoperative outcome of 221 patients, from the last four years, with healed fractures initially treated with intramedullary reamed nails with two or three interlocking screws proximally and distally through a medial paratendinous incision for nail entry portal. Our aim was to analyse a possible relationship between AKP according to the VAS scale, and nail position marked as a distance from tip of nail to tibial plateau (NP) and to tibial tuberosity (NT), measured postoperatively on lateral knee X-rays. RESULTS: Two groups of patients were formed on the basis of presence of pain related to AKP (the level of pain was neglected): group A were patients with pain and group B without pain. The difference between the two groups concerning NP and NT measurements appeared to be statistically significant concerning NT measurement (p < 0.05), with high accuracy according to the classification tree. CONCLUSIONS: We presume that the position of the proximal tip of the nail and its negative influence on the innervation pattern of the area dorsal to patellar tendon could be the key factor of AKP. We conclude that the symptoms of AKP will not appear if the tip of the nail position is more than 5.5 mm from the tibial plateau (NP) and more than 2.5 mm from the tibial tuberosity (NT).

Elements for successful functional result after surgical treatment of intra-articular distal humeral fractures.

Intra-articular distal humeral fractures (DHF) present great challenge to an orthopedic-trauma surgeon. We analyzed the relationship between functional results of DHF surgical treatment and elements that can affect patient recovery. During the 5-year follow-up study, 32 patients were treated for DHF at our Trauma Department, 30 of them by surgical procedure. Functional results of surgical treatment were scored according to the Jupiter criteria. According to the A-O classification of DHF, there were 11 type A fractures, 5 type B fractures and 14 type C fractures. Postoperative complications were infections, neural lesions, inadequate healing, and instability of osteosynthesis. Analysis of functional results in patients with operated C type fractures according to different elements influencing postoperative result revealed correct healing in 74% of patients, which was statistically significantly higher than the percentage of unsatisfactory results (p < 0.05). Study results provided evidence for patient age, sex, infection, neural function preservation, successful and rigid fixation, anatomical reconstruction of articular surface, and early rehabilitation to be significant elements for successful functional recovery.

Venomous snakebites in the Croatian North Dalmatia region.

AIM: The aim of this research project is to analyze the epidemiological, clinical and laboratory attributes of venomous snakebites and to ascertain the timely and efficient treatment at the location where the incident took place or in varying clinical conditions. METHODS: Epidemiological, clinical and laboratory data were collected from people who were bitten by venomous snakes as well as treatments at Zadar General Hospital during a span of eleven years (1999-2009) which were analyzed retrospectively. RESULTS: During that period, 93 people were bitten by venomous snakes of which 57 patients (62%) were male and 36 (38%) were female. In 82 cases (90%), the bite area was localized on the limbs while in the remaining 11 cases the bite area was located elsewhere. At the time of the venomous snakebite, 31 (33%) patients were performing leisure activities and 44 (47.31%) of them were at work. The most common local snakebite signs are swelling and pain at the bite site (93 patients; 100%), hematomas and ecchymoses (87 patients; 89%). Of the affected patients, 8 suffered from compartment syndrome and one person (0.97%) expired. CONCLUSION: Antivenom treatment for preventing possible allergic reactions should take place at the medical institution where the victim was transported. However, when transport is not immediately available or in cases where the victim shows clear signs of envenomation, antivenom treatment should be used immediately because its effect is weaker if the venom is allowed to run its course.

Effect of pesticides on wound contraction.

Agricultural injuries are a complex surgical problem, especially because of frequently extensive skin lesions prone to infection and delayed healing. The aim of the study was to assess the local effect of pesticides, chemical substances widely used in agriculture, on wound healing, especially on wound contraction. Local effects of the combined herbicide composed of atrazine and dual (Primextra) and insecticide alphametrin (Fastac 10% SC) on primary wound healing were assessed in a bioassay performed in 18 New Zealand white rabbits. Relative size of the wound, measured on days 0, 1, 3, 6, 9 and 12 of wounding was analyzed by two-factor analysis of variance with repeat measurements. The activity of the process of restoration was assessed on histopathologic preparations obtained after the last measurement. Results of the study showed the final wound contraction to be smaller and the process of healing slower in the experimental groups of animals. Histopathology revealed defects of epithelialization, phasic delay in healing, infiltration with eosinophilic granulocytes, and decreased density of newly formed collagen. Pesticides were concluded to have adverse local effects on the wound, causing impairment of the mechanisms of healing.